3d-printable case for the Odroid-H2 SBC

2019-12-29 12:15
I have designed a 3D printable case for the Hardkernel Odroid-H2 single board computer (SBC) with OpenSCAD. The H2 is an x86-based board with an Intel Celeron J4105, two DDR4 SO-DIMM slots and lots of I/O (2x GbE, 2x SATA, M.2 SSD, USB3, DisplayPort, HDMI, ...).

The case is configurable and supports up to one 2.5" disk drive with a height of up to 15 mm. It consists of two parts and is pretty easy to print.

Odroid-H2 case
I have created the case with OpenSCAD 2019.05. Included are both the OpenSCAD source files as well as STL files for one typical configuration of the case. The OpenSCAD files can be used to create custom versions of the case with the OpenSCAD Customizer. All files are licensed under the Creative Commons Attribution 3.0 license (CC-BY).

odroid-h2-case-1.1.zip (133 KB)

The case design is also available on Thingiverse.
 

Leave a comment

Name
E-Mail
Website
Homepage
Comment